溫變粉Temperature powder
變色原理metachromatic principle
感溫變色是一種隨溫度上升、下降而反復改變顏色的微膠囊顏料。變色形式：低溫有色，高溫無色?？梢苑磸妥儞Q顏色。
Thermal discoloration is a kind of color change with temperature rising, falling and repeated the microcapsule of pigment. Color change form: low temperature, high temperature colorless. Can change color again and again.
色系、溫度以及變色形式Color, temperature and discoloration
感溫變色基本顏色： 大紅、朱紅、玫紅、桃紅、橙紅、金黃、紫羅蘭、深藍、藍色、綠色、黑色、土耳其藍
Thermal discoloration basic colors: bright red, scarlet, mei red, pink, orange, yellow, violet, dark blue, blue, green, blue, black, Turkey
溫度有：5℃，8℃，10℃，12℃，15℃，18℃，22℃，28℃，31℃，33℃，35℃，38℃，40℃，43℃，45℃，50℃，55℃，60℃，62℃，65℃，70℃等。以上溫度為可逆溫度，例如31度紅色溫度高于31變無色溫度低于31變紅色。
Temperature: 5 ℃ 8 ℃, 10 ℃, 12 ℃, 15 ℃, 18 ℃, 22 ℃, 28 ℃, 31 ℃ and 33 ℃, 35 ℃, 38 ℃, 40 ℃ and 43 ℃, 45 ℃, 50 ℃ and 55 ℃, 60 ℃, 62 ℃, 65 ℃, 70 ℃, etc. 31 degrees above the temperature of the reversible temperature, such as red temperature higher than 31 colorless temperature below 31 red.
有色變有色：紫變紅 藍變紅 綠變藍 紫變藍 橙變黃 藍變黃 紅變黃 黑變紫 黑變紅 黑變藍 黑變綠 黑變橙 大紅變粉紅 深藍變淺藍 深綠變淺綠 深黃變淺黃
Color change color: purple red blue red green blue purple blue red, yellow orange yellow, blue, yellow black change purple black red and black blue dark green is dark orange red change pink blue pale blue green deep yellow light green yellow
感溫變色材料的應用與用途
The application and use of thermal color materials
*涂料：適合各類塑膠制品的表面涂覆。含ABS、PE、PP、PS、PVC、EVA及其它塑膠材料等
Coating: suitable for all kinds of plastic products surface coating. Including ABS, PE, PP, PS, PVC, EVA and other plastic materials
*油墨：適合于各類印刷，包適網版、凹版和凸版印刷，可印刷于各式材料，包括紡織、紙張、合成膜、玻璃、陶瓷和木材等。
Ink: suitable for all kinds of printing, BaoShi network edition, intaglio and letterpress printing, can be printed in a variety of materials, including textile, paper, synthetic membrane, glass, ceramic and wood, etc.
*塑膠：高色濃度的共用級塑膠色母粒可以混入PE、PP、PS、PVC、EVA、PET、及Nylon中一起射出、押出產品。
Plastic: high concentration of color grade common plastic masterbatch can be mixed with PE, PP, PS, PVC, EVA, PET, and Nylon injection, and the product together.
操作注意事項Operating considerations
溫變粉注塑適用的材料為：PP/PVC/ABS/PU/EVA/硅膠
Temperature powder for injection applicable materials: PP/ABS/PVC/PU/EVA/silica gel
溫變粉的注塑比例為0.5%-0.8%，通常為0.5%，普通顏料遇變色顏料拼色，則普通顏料（或染料）的用量大約為變色顏料的0.5%-2.5%
Temperature powder injection rate is 0.5% - 0.8%, 0.5%, usually in ordinary paint color pigment color matching, the ordinary pigment or dye dosage of approximately 0.5% - 0.5% of color pigments
注塑分散不開可加分散劑（白蠟油、分散油）、擴散粉、白油。白蠟油加入有種濕濕的使混合更均勻，加多會起泡，加1%左右，也可不加。
Injection scattered don't open the disperser (white wax oil, dispersed oil), diffusion, white powder. White wax oil mixed with a wet make more evenly, add up bubbles, add 1%, also don't add.
可調色：除金銀白外都可以調色。有色變有色只能兩個接近撞色才能調。
Color: can be color except gold and silver white. Color change of color only two close to bump color tone.
用料：透明料效果佳。
Ingredient: transparent material effectively.
注塑成品一般使用壽命是4000-8000次變色次數（正確存儲和使用的情況下）
The service life of the injection molding product general change color number is 4000-8000 times (correct storage and use cases)
保存條件：不耐候，低溫避光，干燥全避光條件保存。
Storage condition: no weather resistance, low temperature away from light, dry dark conditions
感溫變色產品之設計以高溫環境時與低溫環境時有顏色變化為訴求，并大多應用于人體感溫的系列產品，也可做防偽設計使用。
Thermal discoloration of product design in high temperature environment with low temperature environment change color to appeal, and mostly used in the human body thermal series products, also can be used to do security design.